Fisher Metal Detectors

Fisher F5-11DD Metal Detector

Fisher has designed the Fisher F5-11DD metal detector with a 7.8 kHz operating frequency and the hot Fisher 11" DD Coil which will make it a great detector for coin, jewelry, relic and even gold prospecting. The Fisher F5 metal detector has advanced software based motion discrimination with notch for searching trashy areas. The Fisher F5 metal detector has a brilliant user interface. The Fisher F5 metal detector is also spectacular in another area... user information! The Fisher F5 metal detector feeds the hunter with important data in real time.

The Fisher F5-11DD Metal Detector Features:

Fisher 11" DD Coil
7.8 kHz frequency - good for coin shooting, relic hunting, and casual gold prospecting
Frequency shift for eliminating electrical interference and crosstalk
Advanced software-based motion discrimination with notch for searching trashy areas
All metals auto tune mode for deep-searching in non-trashy areas
Visual target ID by category and 0-99 indication, both discrimination and auto tune modes
Target ID confidence bar graph
High-resolution manual ground balance with continuous ground balance readout
Ground balance range goes all the way to salt
Continuous display of ground mineral concentration and phase
Push-button static pinpoint with variable audio pitch and visual depth reading
Independent gain and threshold knobs provide complete control over sensitivity
Standard 10 inch elliptical concentric open-center searchcoil. Other coils available separately
Two 9-volt alkaline batteries last approximately 40 hours

The variable tone pinpoint system distinguishes between different metals, like nails, pennies, quarters and bottle caps for a more accurate target identification to maximize your digging efforts. The Fisher F5 Metal Detectors comes with a manual ground balancing option to cancel unwanted signals that usually come from natural ground minerals. Easy-to-use control knobs, Elliptical search coil, Requires two 9-volt batteries (not included).

Manufacturer's five-year limited warranty.

Fisher F5 Metal Detectors Specifications:

Mechanical: S-rod with electronics housing on rod, 3-piece breakdown construction, nonmetallic telescoping lower rod, adjustable position arm rest
Weight: 3.0 lbs (1.38 kg) with batteries installed
Search Coil: 11" DD, waterproof
Batteries: two 9 volt rectangular alkaline (will run on one)
Operating Principle: VLF induction balance
Operating Frequency: nominal 7.8 kHz, microprocessor controlled
Basic Sensitivity: 2.5 x 109 root Hertz (detectivity)
Lag Coefficient: 92 milliseconds
Reactive Overload: 5,000 micro-cgs (with standard search coil)
Resistive Overload: 600 micro-cgs (with standard search coil)
Ground Balance Range: from ferrite to salt water inclusive
Discrimination Ground Suppression: combination of 2nd and 3rd order methods
Target ID Ground Suppression: 3rd order
Battery Life: 40+ hours on good quality alkaline
Operating Temp Range: 14 to 122 degrees F (-10 to +50 C)
Operating Humidity Range: 0 - 90% non-condensin
$549.00
[Home][About Us][Policies][Contact Us]
Golden Road Enterprises
142 SE 611 Rd Warrensburg, MO 64093
1-877-653-8732